Change the OAM IP Configuration Using the CLIΒΆ
If you prefer, you can use the CLI to view or change the OAM IP Configuration.
About this task
During installation, StarlingX is configured with an OAM network subnet and related IP addresses. You can change these addresses using the the CLI or the Horizon Web Interface. You can use IPv4 or IPv6 addresses.
Caution
Access to the OAM network is interrupted during this procedure. When a swact is performed on the controllers, the newly active controller uses the changed OAM IP addresses. The existing OAM IP addresses are no longer valid, and you must use the new OAM IP addresses to reconnect to the controller. Changes to external OAM access routing settings may also be required. In addition, VNC console access to worker-node hosts is interrupted until the hosts are locked and unlocked.
Once the OAM IP addresses are changed, any existing server certificates (ssl, docker_registry, OpenStack etc.) that have the old OAM IP addresses in their SANs must be updated with new certificates reflecting the new addresses. For more information, see Install/Update Local Registry Certificates.
To view the existing OAM IP configuration, use the following command.
~(keystone_admin)]$ system oam-show
+-----------------+--------------------------------------+
| Property | Value |
+-----------------+--------------------------------------+
| created_at | 2018-05-16T20:06:25.523495+00:00 |
| isystem_uuid | b0380a56-697c-42f7-97bc-f1e407111416 |
| oam_c0_ip | 10.10.10.3 |
| oam_c1_ip | 10.10.10.4 |
| oam_floating_ip | 10.10.10.2 |
| oam_gateway_ip | 10.10.10.1 |
| oam_subnet | 10.10.10.0/24 |
| updated_at | None |
| uuid | 2818e7c4-f730-43bd-b33d-eaff53a92ee1 |
+-----------------+--------------------------------------+
To change the OAM IP subnet, floating IP address, gateway IP address, or controller IP addresses, use the following command syntax.
~(keystone_admin)]$ system oam-modify oam_subnet=<subnet>/<netmask> \
oam_gateway_ip=<gateway_ip_address> \
oam_floating_ip=<floating_IP_address> \
oam_c0_ip=<controller-0_IP_address> \
oam_c1_ip=<controller-1_ip_address>
For example:
~(keystone_admin)]$ system oam-modify oam_subnet=10.10.10.0/24 \
oam_gateway_ip=10.10.10.1 \
oam_floating_ip=10.10.10.2 \
oam_c0_ip=10.10.10.3 \
oam_c1_ip=10.10.10.4
Note
On AIO Simplex systems, the oam_floating_ip, oam_c0_ip and oam_c0_ip parameters are not supported. To change the OAM IP address of a Simplex System, the parameter oam_ip must be used in combination with oam_gateway_ip and oam_subnet.
For example:
~(keystone_admin)]$ system oam-modify oam_subnet=10.10.10.0/24 oam_gateway_ip=10.10.10.1 oam_ip=10.10.10.2
Note
If you change the IP address version (IPv4 or IPv6), ensure that the same version is used for the DNS and NTP servers.
After changing the OAM server configuration, you must lock and unlock the controllers. This process requires a swact on the controllers. Then you must lock and unlock the worker nodes one at a time, ensuring that sufficient resources are available to migrate any running instances.
Note
On AIO Simplex systems you do not need to lock and unlock the host. The changes are applied automatically.
For more information about the default firewall rules, see Default Firewall Rules.
For more information about modifying the firewall options, see Modify Firewall Options.
(Optional) If you are running Docker proxy on your system, you need to change the no_proxy service parameter using the CLI to append the new OAM IP, using the following steps:
To list the service parameters, use the system service-parameter-list command. Note the old no_proxy values.
To append the new OAM IP to the no_proxy parameter, use the system serviceparameter-modify docker proxy no_proxy=old_value, new_oam_ip(s) command.
Where, <new_oam_ip(s)> is the new OAM IP(s) that needs to be appended to the no_proxy parameter. Ensure you include new values for the floating OAM, controller-0 OAM, and controller-1 if they are changed.
To apply the changes, use the system service-parameter-apply docker command.
Lock and unlock the controller(s).
