PXE Boot Network

You can set up a PXE boot network for booting all nodes to allow a non-standard management network configuration.

The internal management network is used for PXE booting of new hosts and the PXE boot network is not required. However there are scenarios where the internal management network cannot be used for PXE booting of new hosts. For example, if the internal management network needs to be on a VLAN-tagged network for deployment reasons, or if it must support IPv6, you must configure the optional untagged PXE boot network for PXE booting of new hosts using IPv4.

Note

StarlingX does not support IPv6 PXE booting.