Update Orchestration of Subclouds Using the CLI

For Distributed Cloud update orchestration, you can use the dcmanager commands from the command line interface. These are similar to the sw-manager commands used to define and execute update strategies on non-distributed systems, or on the SystemController RegionOne.

To use the Horizon Web interface instead, see Update Orchestration of Subclouds.

Note

Before you can use Distributed Cloud update orchestration, you must upload and apply one or more updates to the SystemController / central update repository, and then update the RegionOne. For more information, see Upload and Apply Updates to SystemController Using the CLI.

Patch Strategy Settings

The update strategy for a Distributed Cloud system controls how updates are applied to the subclouds. The following settings are available:

subcloud apply type

parallel or serial — determines whether the subclouds are updated in parallel, or serially.

If this is not specified using the CLI, the values for subcloud_update_type defined for each subcloud group will be used by default.

maximum parallel subclouds

Sets the maximum number of subclouds that can be updated in parallel (default 20).

If this is not specified using the CLI, the values for max_parallel_subclouds defined for each subcloud group will be used by default.

stop on failure

true (default) or false — determines whether update orchestration failure for a subcloud prevents application to subsequent subclouds.

upload only

the patch strategy will only upload the necessary patches to the subclouds, without executing the other steps (apply, install, reboot, etc.).

  • To create a update strategy, use the patch-strategy create command.

    ~(keystone_admin)]$ dcmanager patch-strategy create \
[--subcloud-apply-type <type>] \
[–-max-parallel-subclouds <i>] \
[–-stop-on-failure <level>] \
[--upload-only] \
[--group group] \
[<subcloud>]

    For example:

    ~(keystone_admin)]$ dcmanager patch-strategy create --group 10
+------------------------+----------------------------+
| Field                  | Value                      |
+------------------------+----------------------------+
| subcloud apply type    | parallel                   |
| max parallel subclouds | 10                         |
| stop on failure        | False                      |
| state                  | initial                    |
| created_at             | 2021-01-07T14:54:58.634476 |
| updated_at             | None                       |
+------------------------+----------------------------+

    Note

    You can optionally pass the name or ID of a subcloud group to the patch-strategy create command. This results in a strategy that is applied only to all subclouds in the specified group. The subcloud group values are used for subcloud apply type and max parallel subclouds parameters.

    To only upload the necessary patches to the subclouds, without executing the other steps (apply, install, reboot, etc.), use the patch-strategy create --upload-only command.

    ~(keystone_admin)]$ dcmanager patch-strategy create --upload-only
+------------------------+----------------------------+
| Field                  | Value                      |
+------------------------+----------------------------+
| strategy type          | patch                      |
| subcloud apply type    | None                       |
| max parallel subclouds | None                       |
| stop on failure        | False                      |
| upload only            | True                       |
| state                  | initial                    |
| created_at             | 2023-03-08T13:58:50.130629 |
| updated_at             | None                       |
+------------------------+----------------------------+

    Note

    This is useful to reduce the total time it takes to run the orchestration during a system maintenance window by enabling the user to upload the patches to the subclouds before the system maintenance window.

    If the --upload-only option is used, the updating patches state skips directly to the complete state once the patches are uploaded to the subclouds.

  • To show the settings for the update strategy, use the patch-strategy show command.

    For example:

    ~(keystone_admin)]$ dcmanager patch-strategy show
+------------------------+----------------------------+
| Field                  | Value                      |
+------------------------+----------------------------+
| subcloud apply type    | parallel                   |
| max parallel subclouds | 20                         |
| stop on failure        | False                      |
| state                  | initial                    |
| created_at             | 2018-02-02T14:42:13.822499 |
| updated_at             | None                       |
+------------------------+----------------------------+

    Note

    A value of None for subcloud apply type, and max parallel subclouds indicates that subcloud group values are being used.

  • To apply the update strategy, use the patch-strategy apply command.

    ~(keystone_admin)]$ dcmanager patch-strategy apply
+------------------------+----------------------------+
| Field                  | Value                      |
+------------------------+----------------------------+
| subcloud apply type    | parallel                   |
| max parallel subclouds | 20                         |
| stop on failure        | False                      |
| state                  | applying                   |
| created_at             | 2018-02-02T14:42:13.822499 |
| updated_at             | 2018-02-02T14:42:19.376688 |
+------------------------+----------------------------+

  • To show the step currently being performed on each of the subclouds, use the strategy-step list command.

    For example:

    ~(keystone_admin)]$ dcmanager strategy-step list
    +------------------+-------+-------------+-----------------------------+----------------------------+----------------------------+
    | cloud            | stage | state       | details                     | started_at                 | finished_at                |
    +------------------+-------+-------------+-----------------------------+----------------------------+----------------------------+
    | subcloud-1       |     1 | applying... | apply phase is 66% complete | 2018-03-13 14:16:02.457588 | None                       |
    | subcloud-4       |     1 | applying... | apply phase is 83% complete | 2018-03-13 14:16:02.463213 | None                       |
    | subcloud-5       |     1 | finishing   |                             | 2018-03-13 14:16:02.473669 | None                       |
    | subcloud-6       |     1 | applying... | apply phase is 66% complete | 2018-03-13 14:16:02.483422 | None                       |
    +------------------+-------+-------------+-----------------------------+----------------------------+----------------------------+

  • To show the step currently being performed on a subcloud, use the strategy-step show <subcloud> command.

    ~(keystone_admin)]$ dcmanager strategy-step show <subcloud>

  • To abort the current update orchestration operation, use the patch-strategy abort command.

    Note

    The dcmanager patch-strategy abort command completes the current updating stage before aborting, to prevent hosts from being left in a locked state requiring manual intervention.

    ~(keystone_admin)]$ dcmanager patch-strategy abort

  • To delete a update strategy, use the patch-strategy delete command.

    ~(keystone_admin)]$ dcmanager patch-strategy delete
+------------------------+----------------------------+
| Field                  | Value                      |
+------------------------+----------------------------+
| subcloud apply type    | parallel                   |
| max parallel subclouds | 20                         |
| stop on failure        | False                      |
| state                  | deleting                   |
| created_at             | 2018-03-23T20:04:50.992444 |
| updated_at             | 2018-03-23T20:05:14.157352 |
+------------------------+----------------------------+

Configuration for Specific Subclouds

To determine how updates are applied to the nodes on each subcloud, the update strategy refers to separate configuration settings. The following settings are applied by default:

  • storage apply type: parallel

  • worker apply type: parallel

  • max parallel workers: 10

  • alarm restriction type: relaxed

  • default instance action: migrate

To update the default values, use the dcmanager patch-strategy-config update command. You can also use this command to configure custom behavior for individual subclouds.

Note

Since re-location is not possible on a single-node StarlingX Simplex system, you must change the configuration to set default_instance_action to stop-start.

  • To list the default update strategy and any custom configurations configured for individual subclouds, use the patch-strategy-config list command.

    For example:

    ~(keystone_admin)]$ dcmanager patch-strategy-config list
+--------------------+--------------------+--------------------+-----------------------+------------------------+------------------+
| cloud              | storage apply type | worker apply type  | max parallel workers  | alarm restriction type | default instance |
|                    |                    |                    |                       |                        | action           |
+--------------------+--------------------+--------------------+-----------------------+------------------------+------------------+
| all clouds default | parallel           | parallel           |                    10 | relaxed                | migrate          |
| subcloud-6         | parallel           | parallel           |                     2 | relaxed                | stop-start       |
+--------------------+--------------------+--------------------+-----------------------+------------------------+------------------+

  • To show the configuration settings applicable to all subclouds by default, use the patch-strategy-config show command.

    ~(keystone_admin)]$ dcmanager patch-strategy-config show
+-------------------------+--------------------+
| Field                   | Value              |
+-------------------------+--------------------+
| cloud                   | all clouds default |
| storage apply type      | parallel           |
| worker apply type       | parallel           |
| max parallel workers    | 10                 |
| alarm restriction type  | relaxed            |
| default instance action | migrate            |
| created_at              | None               |
| updated_at              | None               |
+-------------------------+--------------------+

  • To update the settings, or to create a custom configuration for a subcloud, use the patch-strategy-config update command.

    ~(keystone_admin)]$ dcmanager patch-strategy-config update \
 \
–-storage-apply-type <type> \
–-worker-apply-type <type> \
–-max-parallel-workers <i> \
–-alarm-restriction-type <level> \
–-default-instance-action <action> \
[<subcloud_name>]

    where

    storage apply type

    parallel or serial — determines whether storage nodes are updated in parallel or serially.

    worker apply type

    parallel or serial — determines whether worker nodes are updated in parallel or serially.

    max parallel workers

    Set the maximum number of worker nodes that can be updated in parallel.

    alarm restriction type

    relaxed or strict — determines whether the orchestration is aborted for alarms that are not management-affecting. For more information, refer to StarlingX Updates and Upgrades: Configure Update Orchestration.

    default instance action

    Note

    This parameter is only applicable to hosted application VMs with the stx-openstack application.

    migrate or stop-start — determines whether hosted application VMs are migrated or stopped and restarted when a worker host is upgraded.

    subcloud_name

    The name of the subcloud to use the custom strategy. If this omitted, the default update strategy is updated.

    Note

    You must specify all of the settings.

  • To show the configuration settings for a subcloud, use the patch-strategy-config show <subcloud> command.

    ~(keystone_admin)]$ dcmanager patch-strategy-config show [<name>]

    For example:

    ~(keystone_admin)]$ dcmanager patch-strategy-config show subcloud-6
+-------------------------+----------------------------+
| Field                   | Value                      |
+-------------------------+----------------------------+
| cloud                   | subcloud-6                 |
| storage apply type      | parallel                   |
| worker apply type       | parallel                   |
| max parallel workers    | 2                          |
| alarm restriction type  | relaxed                    |
| default instance action | stop-start                 |
| created_at              | 2018-03-12 20:08:48.917866 |
| updated_at              | None                       |
+-------------------------+----------------------------+

    If custom configuration settings have not been created for the subcloud, the following message is displayed:

    ERROR (app) No options found for Subcloud with id 1, defaults will be used.