Certificate Configuration¶

Note

This guide was replaced by: HTTPS and Certificates Management Overview

This guide describes how to enable secure HTTPS access and manage certificates using StarlingX.

Configure HTTPS access ¶

StarlingX allows you to enable secure HTTPS access and/or manage certificates for various external interfaces and services. You can also add trusted CAs for the StarlingX platform and the OpenStack application.

Note

The default HTTPS X.509 certificates used by StarlingX, Kubernetes, and OpenStack for authentication are not signed by a known authority. For increased security, we recommend you obtain, install, and use certificates that have been signed by a certificate authority.

StarlingX platform REST API applications and the StarlingX Horizon GUI ¶

By default, StarlingX platform provides HTTP access for REST API application endpoints (Keystone, Barbican, and StarlingX) and the StarlingX platform Horizon GUI. For improved security, you can enable HTTPS access for these service endpoints. When HTTPS access is enabled, HTTP access is disabled.

To enable HTTPS:

~(keystone_admin)]$ system modify --https_enabled true

To disable HTTPS:

~(keystone_admin)]$ system modify --https_enabled false

To display HTTPS settings:

[sysadmin@controller-0 ~(keystone_admin)]$ system show

When HTTPS is enabled for the first time on a StarlingX platform system, a self-signed certificate is automatically installed. In order to connect, remote clients must be configured to accept the self-signed certificate without verifying it. This is called insecure mode.

For secure-mode connections, a CA-signed certificate, or an ICA (intermediate CA) signed certificate is required. Using a CA or ICA signed certificate is strongly recommended.

To install (or update) the certificate used by StarlingX REST API applications and the StarlingX Horizon GUI:
```
~(keystone_admin)]$ system certificate-install -m ssl <keyAndCert.pem>
```
where <keyAndCert.pem> == a PEM file containing both the private key and the signed public certificate. In the case of an ICA signed certificate, the PEM file also contains the intermediate CA certificates. The certificates in the file should be ordered such that each of the certificates is signed by the succeeding one, with the public certificate as the very first in the list.

You can update the certificate used by StarlingX platform at any time after installation.

For additional security, StarlingX platform supports secure storage of the SSL private key (for the StarlingX REST APIs and the StarlingX Horizon GUI, discussed above) using TPM. You can optionally use TPM to protect HTTPS SSL private keys for use by the REST API, remote CLI, and Horizon web interface. TPM 2.0-compliant hardware must be available on the controller hosts before the hosts are provisioned.

To install (or update) the certificate used by StarlingX REST API applications and the StarlingX Horizon GUI and store the private key securely in a TPM 2.0 hardware device on the controller:
```
~(keystone_admin)]$ system certificate-install -m tpm <keyAndCert.pem>
```
where <keyAndCert.pem> == a PEM file containing both the private key and the signed public certificate.

Note that TPM must be enabled in the UEFI on both controllers, and both controllers must be provisioned and unlocked before you can install the certificate in TPM.

Kubernetes ¶

For the Kubernetes API server, HTTPS is always enabled. Similarly, a self-signed certificate is used for the Kubernetes root CA certificate by default. We recommend that you update this certificate with a certificate signed by a Certificate Authority.

Currently the Kubernetes root CA certificate and key can only be updated at Ansible bootstrap time. For details, see Kubernetes root CA certificate and key.

Local Docker registry ¶

HTTPS is always enabled for the local Docker registry. Similarly, a self-signed certificate is used by default, however, we recommend that you update the certificate with a certificate signed by a Certificate Authority or an intermediate Certificate Authority after installation.

To install (or update) the certificate used by the local Docker registry:
```
~(keystone_admin)]$ system certificate-install -m docker_registry <keyAndCert.pem>
```
where <keyAndCert.pem> == a PEM file containing both the private key and the signed public certificate. In the case of an ICA signed certificate, the PEM file also contains the intermediate CA certificates. The certificates in the file should be ordered such that each of the certificates is signed by the succeeding one, with the public certificate as the very first in the list.

Note that the CA-signed certificate for the registry must have at least the following SANs:
- DNS:registry.local
- DNS:registry.central
- IP Address:oam-floating-ip-address
- IP Address:mgmt-floating-ip-address
Use the system addrpool-list command to get the oam floating IP Address and management floating IP Address for your system. You can add any additional DNS entry(s) that you have set up for your oam floating IP Address.

OpenStack REST API applications and OpenStack application Horizon GUI ¶

By default, the OpenStack application provides HTTP access for REST API application endpoints and the OpenStack application Horizon GUI. For improved security, you can enable HTTPS access. When HTTPS access is enabled, HTTP access is disabled.

To enable HTTPS for OpenStack:

Optionally, but recommended, configure the public endpoint FQDN:
```
$ system service-parameter-add openstack helm endpoint_fqdn=domain_name
```
where domain_name is a fully qualified domain name such as example.com.

Open port 443 for ingress connections. Port 443 is not open for ingress connections by default, and must be explicitly added to the GlobalNetworkPolicy. This can be done by applying a yaml file using kubectl.

Create a yaml file containing the rule to be applied. For example:

# This rule opens up default HTTPS port 443
# It is required to access openstack Horizon via FQDN
apiVersion: crd.projectcalico.org/v1
kind: GlobalNetworkPolicy
metadata:
  name: gnp-openstack-oam
spec:
  ingress:
  - action: Allow
    destination:
      ports:
      - 443
    protocol: TCP
  order: 500
  selector: has(iftype) && iftype == 'oam'
  types:
  - Ingress

Apply this file using kubectl apply -f fileName.yaml. For example:

$ kubectl apply -f gnp-openstack-oam.yaml

If not already done, enable HTTPS.
```
$ system modify --https_enabled=True
```
If not already done, install the certificate for the StarlingX platform:
```
$ system certificate-install -m ssl <keyAndCert.pem>
```
where <keyAndCert.pem> == a PEM file containing both the private key and the signed public certificate.
Install the certificate for OpenStack:
```
$ system certificate-install -m openstack <keyAndCert.pem>
```
where <keyAndCert.pem> == a PEM file containing both the private key and the signed public certificate.

This certificate must be valid for the domain specified in step 1.
If not already done, upload the OpenStack application manifest and Helm charts:
```
$ system application-upload stx-openstack <stx-openstack-armada-tar-ball>
```
Update the OpenStack Helm charts and apply them to OpenStack services.
```
$ system application-apply stx-openstack
```

Trusted CAs ¶

StarlingX platform and the OpenStack application also support the ability to update the trusted CA bundle on all nodes in the system. For example, for the StarlingX platform, this is required when container images are being pulled from an external Docker registry with a certificate signed by a non-standard CA.

To install (or update) the list of trusted CAs for the StarlingX platform:
```
~(keystone_admin)]$ system certificate-install -m ssl_ca <ca-certs.pem>
```
where <ca-certs.pem> == a PEM file containing one or more CA certificates to add to the list of trusted CAs.
To list the trusted CAs for the StarlingX platform:
```
system certificate-list
```
where all entries with certtype = ssl_ca are trusted CA Certificates.
To remove a CA from the list of trusted CAs for the StarlingX platform:
```
system certificate-uninstall -m ssl_ca <UUID>
```
where <UUID> is the UUID of the ssl_ca certtype to be removed. Use the system certificate-list command to determine the UUID.
To install (or update) the list of trusted CAs for the OpenStack application:
```
~(keystone_admin)]$ system certificate-install -m openstack_ca <ca-certs.pem>
```
where <ca-certs.pem> == a PEM file containing one or more CA certificates.

Note

Only a single trusted CA PEM file is managed, with each invocation of the above command overwriting the previous file. If multiple additional trusted CA certificates are required, there must be multiple CA certificates in the PEM file.

To update the OpenStack Helm charts and apply them:

~(keystone_admin)]$ system application-apply stx-openstack