200 Series Maintenance Customer Log Messages¶
The Customer Logs include events that do not require immediate user action.
The following types of events are included in the Customer Logs. The severity of the events is represented in the table by one or more letters, as follows:
C: Critical
M: Major
m: Minor
W: Warning
NA: Not applicable
Log ID |
Description |
Severity |
---|---|---|
Entity Instance ID |
||
200.020 |
<hostname> has been ‘discovered’ on the network host=<hostname>.event=discovered |
NA |
200.020 |
<hostname> has been ‘added’ to the system host=<hostname>.event=add |
NA |
200.020 |
<hostname> has ‘entered’ multi-node failure avoidance host=<hostname>.event=mnfa_enter |
NA |
200.020 |
<hostname> has ‘exited’ multi-node failure avoidance host=<hostname>.event=mnfa_exit |
NA |
200.021 |
<hostname> board management controller has been ‘provisioned’ host=<hostname>.command=provision |
NA |
200.021 |
<hostname> board management controller has been ‘re-provisioned’ host=<hostname>.command=reprovision |
NA |
200.021 |
<hostname> board management controller has been ‘de-provisioned’ host=<hostname>.command=deprovision |
NA |
200.021 |
<hostname> manual ‘unlock’ request host=<hostname>.command=unlock |
NA |
200.021 |
<hostname> manual ‘reboot’ request host=<hostname>.command=reboot |
NA |
200.021 |
<hostname> manual ‘reset’ request host=<hostname>.command=reset |
NA |
200.021 |
<hostname> manual ‘power-off’ request host=<hostname>.command=power-off |
NA |
200.021 |
<hostname> manual ‘power-on’ request host=<hostname>.command=power-on |
NA |
200.021 |
<hostname> manual ‘reinstall’ request host=<hostname>.command=reinstall |
NA |
200.021 |
<hostname> manual ‘force-lock’ request host=<hostname>.command=force-lock |
NA |
200.021 |
<hostname> manual ‘delete’ request host=<hostname>.command=delete |
NA |
200.021 |
<hostname> manual ‘controller switchover’ request host=<hostname>.command=swact |
NA |
200.022 |
<hostname> is now ‘disabled’ host=<hostname>.state=disabled |
NA |
200.022 |
<hostname> is now ‘enabled’ host=<hostname>.state=enabled |
NA |
200.022 |
<hostname> is now ‘online’ host=<hostname>.status=online |
NA |
200.022 |
<hostname> is now ‘offline’ host=<hostname>.status=offline |
NA |
200.022 |
<hostname> is ‘disabled-failed’ to the system host=<hostname>.status=failed |
NA |