100 Series Alarm Messages¶
The system inventory and maintenance service reports system changes with different degrees of severity. Use the reported alarms to monitor the overall health of the system.
Alarm messages are numerically coded by the type of alarm.
For more information, see Fault Management Overview.
In the alarm description tables, the severity of the alarms is represented by one or more letters, as follows:
C: Critical
M: Major
m: Minor
W: Warning
A slash-separated list of letters is used when the alarm can be triggered with one of several severity levels.
An asterisk (*) indicates the management-affecting severity, if any. A management-affecting alarm is one that cannot be ignored at the indicated severity level or higher by using relaxed alarm rules during an orchestrated patch or upgrade operation.
Note
Degrade Affecting Severity: Critical indicates a node will be degraded if the alarm reaches a Critical level.
Alarm ID: 100.101 |
Platform CPU threshold exceeded; threshold x%, actual y%. CRITICAL @ 95% MAJOR @ 90% |
Entity Instance |
host=<hostname> |
Degrade Affecting Severity: |
Critical |
Severity: |
C/M* |
Proposed Repair Action |
Monitor and if condition persists, contact next level of support. |
Alarm ID: 100.103 |
Memory threshold exceeded; threshold x%, actual y% . CRITICAL @ 90% MAJOR @ 80% |
Entity Instance |
host=<hostname> |
Degrade Affecting Severity: |
Critical |
Severity: |
C/M |
Proposed Repair Action |
Monitor and if condition persists, contact next level of support; may require additional memory on Host. |
Alarm ID: 100.104 |
host=<hostname>.filesystem=<mount-dir> File System threshold exceeded; threshold x%, actual y%. CRITICAL @ 90% MAJOR @ 80% OR host=<hostname>.volumegroup=<volumegroup-name> Monitor and if condition persists, consider adding additional physical volumes to the volume group. |
Entity Instance |
host=<hostname>.filesystem=<mount-dir> OR host=<hostname>.volumegroup=<volumegroup-name> |
Degrade Affecting Severity: |
Critical |
Severity: |
C*/M |
Proposed Repair Action |
Reduce usage or resize filesystem. |
Alarm ID: 100.106 |
‘OAM’ Port failed. |
Entity Instance |
host=<hostname>.port=<port-name> |
Degrade Affecting Severity: |
Major |
Severity: |
M* |
Proposed Repair Action |
Check cabling and far-end port configuration and status on adjacent equipment. |
Alarm ID: 100.107 |
‘OAM’ Interface degraded. or ‘OAM’ Interface failed. |
Entity Instance |
host=<hostname>.interface=<if-name> |
Degrade Affecting Severity: |
Major |
Severity: |
C or M* |
Proposed Repair Action |
Check cabling and far-end port configuration and status on adjacent equipment. |
Alarm ID: 100.108 |
‘MGMT’ Port failed. |
Entity Instance |
host=<hostname>.port=<port-name> |
Degrade Affecting Severity: |
Major |
Severity: |
M* |
Proposed Repair Action |
Check cabling and far-end port configuration and status on adjacent equipment. |
Alarm ID: 100.109 |
‘MGMT’ Interface degraded. or ‘MGMT’ Interface failed. |
Entity Instance |
host=<hostname>.interface=<if-name> |
Degrade Affecting Severity: |
Major |
Severity: |
C or M* |
Proposed Repair Action |
Check cabling and far-end port configuration and status on adjacent equipment. |
Alarm ID: 100.110 |
‘CLUSTER-HOST’ Port failed. |
Entity Instance |
host=<hostname>.port=<port-name> |
Degrade Affecting Severity: |
Major |
Severity: |
C or M* |
Proposed Repair Action |
Check cabling and far-end port configuration and status on adjacent equipment. |
Alarm ID: 100.111 |
‘CLUSTER-HOST’ Interface degraded. OR ‘CLUSTER-HOST’ Interface failed. |
Entity Instance |
host=<hostname>.interface=<if-name> |
Degrade Affecting Severity: |
Major |
Severity: |
C or M* |
Proposed Repair Action |
Check cabling and far-end port configuration and status on adjacent equipment. |
Alarm ID: 100.114 |
NTP configuration does not contain any valid or reachable NTP servers. The alarm is raised regardless of NTP enabled/disabled status. NTP address <IP address> is not a valid or a reachable NTP server. Connectivity to external PTP Clock Synchronization is lost. |
Entity Instance |
host=<hostname>.ntp host=<hostname>.ntp=<IP address> |
Degrade Affecting Severity: |
None |
Severity: |
M or m |
Proposed Repair Action |
Monitor and if condition persists, contact next level of support. |
Alarm ID: 100.118 |
Controller cannot establish connection with remote logging server. |
Entity Instance |
host=<hostname> |
Degrade Affecting Severity: |
None |
Severity: |
m |
Proposed Repair Action |
Ensure Remote Log Server IP is reachable from Controller through OAM interface; otherwise contact next level of support. |
Alarm ID: 100.119 |
<hostname> does not support the provisioned PTP mode OR <hostname> PTP clocking is out-of-tolerance OR <hostname> is not locked to remote PTP Grand Master (PTS) OR <hostname> GNSS signal loss state:<state> OR <hostname> 1PPS signal loss state:<state> |
Entity Instance |
host=<hostname>.ptp OR host=<hostname>.ptp=no-lock OR host=<hostname>.ptp=<interface>.unsupported=hardware-timestamping OR host=<hostname>.ptp=<interface>.unsupported=software-timestamping OR host=<hostname>.ptp=<interface>.unsupported=legacy-timestamping OR host=<hostname>.ptp=out-of-tolerance OR host=<hostname>.instance=<instance>.ptp=out-of-tolerance OR host=<hostname>.interface=<interface>.ptp=signal-loss |
Degrade Affecting Severity: |
None |
Severity: |
M or m |
Proposed Repair Action |
Monitor and, if condition persists, contact next level of support. |