Device Image Update Orchestration

In a Distributed Cloud environment, you can use orchestration strategies to manage device image updates, including FPGA updates.

About this task

Note

Due to limitations with the existing device image update mechanisms for the N3000 FPGA hardware, applying more than one image at a time to a given hardware device is currently not supported. If multiple device images are to be written to a single device, such as a root-key image and a functional image, the first device image should be applied, then dcmanager should be used to create and apply an update strategy. Once the update strategy has completed then the second device image should be applied and dcmanager should be used to create and apply a second update strategy for the second device image.

Note

For BMC images on N3000 FPGA hardware, it is recommended that the admin user uses the md5sum of the device image file as the bitstream ID. This will ensure that different files get unique IDs, and the same file gets the same ID.

Prerequisites

  • Only one type of dcmanager strategy can exist at a time. Run dcmanager fw-update-strategy delete to delete any existing strategies before creating a new update (patch) strategy. Similarly, after using an update (patch) strategy you will need to delete it before creating a fw-update strategy.

  • Before applying a new functional device image for the same PCI vendor/device and label as a functional image that has already been applied, you need to remove the previous device image from that label using the following command:

    system --os-region-name SystemController device-image-remove image_uuid <name>=<value>
    

Procedure

  1. Assign labels to PCI devices in each subcloud.

    1. List known devices on a host.

      To list devices from a subcloud, run:

      ~(keystone_admin)]$ system host-device-list <hostname_or_id>
      

      To list devices from the Central cloud, run:

      ~(keystone_admin)]$ system  --os-region-name <region> --os-auth-url <subcloud_keystone_url> host-device-list <hostname_or_id>
      
    2. Assign labels.

      ~(keystone_admin)]$ system host-device-label-assign [--overwrite] <hostname_or_id> <pci_name_or_address> <name>=<value> [<name>=<value> ...]
      

      Warning

      It is recommended not to apply a functional device image for a given hardware device with a specific label, and a different functional device image for the same hardware device with a different label. This can cause dcmanager to toggle between the two device images every time device-image-apply is run.

      Either use single label for each hardware device, or use caution to avoid this scenario if using multiple device labels per device.

  2. From the Central cloud, upload one or more device images in the System Controller region.

    • To upload a root-key device image:

      ~(keystone_admin)]$ system --os-region-name SystemController device-image-upload <imagefile> root-key <pci_vendor> <pci_device> --key-signature <key_signature> --name <imagename> --description <description> --image-version <version>
      
    • To upload a revocation key device image:

      ~(keystone_admin)]$ system --os-region-name SystemController device-image-upload <imagefile> key-revocation <pci_vendor> <pci_device> --revoke-key-id <revoke_key_id> --name <imagename> --description <description> --image-version <version>
      
    • To upload a functional device image:

      ~(keystone_admin)]$ system --os-region-name SystemController device-image-upload <imagefile> functional <pci_vendor> <pci_device> --bitstream-id <bitstream_id> --name <imagename> --description <description> --image-version <version>
      

    For more information about uploading images, see StarlingX Node Configuration and Management: Uploading a Device Image.

  3. Apply one or more device images in the System Controller region.

    You can apply multiple device images in the System Controller region provided they are for different devices or different labels.

    Note

    If you have applied multiple device labels per device, use caution to avoid toggling between the two device images due to both labels being applied to the same device.

    ~(keystone_admin)]$ system --os-region-name SystemController device-image-apply <image_uuid>
    

    For more information about applying images, see StarlingX Node Configuration and Management: Updating an Intel N3000 FPGA Image.

  4. Create an update strategy using the fw-update-strategy create command.

    The update strategy controls how FPGA updates are applied to hosts on subclouds. Creating, applying and monitoring the strategy can be done using CLI or Horizon web interface.

    If you want to use Horizon, see Create a Firmware Update Orchestration Strategy using Horizon

    The update strategy controls how FPGA updates are applied to hosts on subclouds.

    ~(keystone_admin)]$ dcmanager fw-update-strategy create \
    [--subcloud-apply-type <type>] \
    [–-max-parallel-subclouds <i>] \
    [–-stop-on-failure true|false ] \
    [--group group] \
    [<subcloud>]
    

    where:

    subcloud-apply-type

    parallel or serial — determines whether the subclouds are updated in parallel, or serially.

    If this is not specified using the CLI, the values for subcloud_update_type defined for each subcloud group will be used by default.

    max-parallel-subclouds

    Sets the maximum number of subclouds that can be updated in parallel (default 20).

    If this is not specified using the CLI, the values for max_parallel_subclouds defined for each subcloud group will be used by default.

    stop-on-failure

    true or false (default) — determines whether update orchestration failure for a subcloud prevents application to subsequent subclouds.

    group

    Optionally pass the name or ID of a subcloud group to the fw-update-strategy create command. This results in a strategy that is only applied to all subclouds in the specified group. The subcloud group values are used for subcloud apply type and max parallel subclouds parameters.

    For example:

    ~(keystone_admin)]$ dcmanager fw-update-strategy create
    +------------------------+----------------------------+
    | Field                  | Value                      |
    +------------------------+----------------------------+
    | strategy type          | firmware                   |
    | subcloud apply type    | None                       |
    | max parallel subclouds | None                       |
    | stop on failure        | False                      |
    | state                  | initial                    |
    | created_at             | 2020-08-11T18:13:40.576659 |
    | updated_at             | None                       |
    +------------------------+----------------------------+
    
  5. Apply the firmware update strategy.

    ~(keystone_admin)]$ dcmanager fw-update-strategy apply
    +------------------------+----------------------------+
    | Field                  | Value                      |
    +------------------------+----------------------------+
    | strategy type          | firmware                   |
    | subcloud apply type    | None                       |
    | max parallel subclouds | None                       |
    | stop on failure        | False                      |
    | state                  | applying                   |
    | created_at             | 2020-08-11T18:13:40.576659 |
    | updated_at             | 2020-08-11T18:13:56.525459 |
    +------------------------+----------------------------+
    
  6. Monitor progress as the strategy is applied.

    • To monitor the step currently being performed on all subclouds, do the following:

      ~(keystone_admin)]$ dcmanager strategy-step list
      +-----------+-------+----------+------------------------------+----------------------------+----------------------------+
      | cloud     | stage | state    | details                      | started_at                 | finished_at                |
      +-----------+-------+----------+------------------------------+----------------------------+----------------------------+
      | subcloud1 |     2 | complete |                              | 2020-08-13 14:12:11.223001 | 2020-08-13 14:15:52.450908 |
      +-----------+-------+----------+------------------------------+----------------------------+----------------------------+
      | subcloud2 |     2 | applying | apply phase is 66% complete  | 2020-08-13 14:12:12.262001 | None                       |
      +-----------+-------+----------+------------------------------+----------------------------+----------------------------+
      | subcloud3 |     2 | applying | apply phase is 18% complete  | 2020-08-13 14:12:13.457588 | None                       |
      +-----------+-------+----------+------------------------------+----------------------------+----------------------------+
      
    • To monitor the step currently being performed on a specific subcloud, do the following:

      ~(keystone_admin)]$ dcmanager strategy-step show <subcloud_name>
      +-------------+----------------------------+
      | Field       | Value                      |
      +-------------+----------------------------+
      | cloud       | subcloud1                  |
      | stage       | 2                          |
      | state       | complete                   |
      | details     |                            |
      | started_at  | 2020-08-11 18:53:52.738079 |
      | finished_at | 2020-08-11 18:54:04.886140 |
      | created_at  | 2020-08-11 18:53:31.962478 |
      | updated_at  | 2020-08-11 18:54:04.907063 |
      +-------------+----------------------------+
      
  7. If, for any reason, you need to cancel a strategy during application, use the fw-update-strategy abort command.

    Note

    This command completes the current updating stage before aborting, to prevent hosts from being left in a locked state requiring manual intervention. It has no effect on strategies in the completed state.

    ~(keystone_admin)]$ dcmanager fw-update-strategy abort
    +------------------------+----------------------------+
    | Field                  | Value                      |
    +------------------------+----------------------------+
    | strategy type          | firmware                   |
    | subcloud apply type    | None                       |
    | max parallel subclouds | None                       |
    | stop on failure        | False                      |
    | state                  | abort requested            |
    | created_at             | 2020-08-11T19:13:41.153044 |
    | updated_at             | 2020-08-11T19:13:54.121796 |
    +------------------------+----------------------------+
    

Postrequisites

When done, delete the strategy:

~(keystone_admin)]$ dcmanager fw-update-strategy delete
+------------------------+----------------------------+
| Field                  | Value                      |
+------------------------+----------------------------+
| strategy type          | firmware                   |
| subcloud apply type    | None                       |
| max parallel subclouds | None                       |
| stop on failure        | False                      |
| state                  | deleting                   |
| created_at             | 2020-08-11T18:53:31.929881 |
| updated_at             | 2020-08-11T19:13:03.820865 |
+------------------------+----------------------------+