Authenticate Kubernetes Users with Windows Active Directory Server¶

Note

This guide was replaced by: Overview of LDAP Servers

This guide describes how to authenticate users of the Kubernetes API via a remote Windows Active Directory server, using the oidc-auth-apps application.

Configure the kube-apiserver ¶

Configure the Kubernetes cluster with a few extra parameters for the kube-apiserver. You can do this during bootstrap or after installation.

Configure as part of bootstrap¶

Add the following items to localhost.yml during bootstrap:

apiserver_oidc:
  client_id: stx-oidc-client-app
  issuer_url: https://<oam-floating-ip>:30556/dex
  username_claim: email
  groups_claim: groups

The username_claim and groups_claim parameter values can vary for different user and group configurations within your Windows Active Directory server.

Configure post-install¶

Execute the following commands to add the OIDC parameters to the kube-apiserver:

system service-parameter-add kubernetes kube_apiserver oidc_client_id=value
system service-parameter-add kubernetes kube_apiserver oidc_groups_claim=value
system service-parameter-add kubernetes kube_apiserver oidc_issuer_url=value
system service-parameter-add kubernetes kube_apiserver oidc_username_claim=value
system service-parameter-apply kubernetes

Configure oidc-auth-apps application ¶

The oidc-auth-apps application is a system managed application that is packaged in the ISO and uploaded by default. To use the oidc-auth-apps application for authentication, you must first configure and deploy the oidc-auth-apps application as described below.

These commands assume the cert and key pem files for creating these secrets are in /home/sysadmin/ssl/.

Create a secret with the certificate and key (local-dex.tls) to be used by the oidc-auth-apps as well as a secret with the CA that signed this certificate (dex-client-secret) for the client. The certificate should be signed by a CA trusted by the system. If the certificate is signed by a CA that is not trusted by default, you can make the system trust the CA by specifying it during bootstrap by specifying ssl_ca_cert in localhost.yml, or through system certificate-install -m ssl_ca ... after bootstrap.
```
kubectl create secret tls local-dex.tls --cert=ssl/dex-cert.pem --key=ssl/dex-key.pem -n kube-system
kubectl create secret generic dex-client-secret --from-file=/home/sysadmin/ssl/dex-ca.pem  -n kube-system
```
Create a Kubernetes secret wadcert with the CA’s certificate that signed the Active Directory’s certificate using the following command:
```
kubectl create secret generic wadcert --from-file=ssl/AD_CA.cer -n kube-system
```

Specify user overrides for oidc-auth-apps.

system helm-override-update oidc-auth-apps dex kube-system --values /home/sysadmin/dex-overrides.yaml

The only mandatory section is the “connectors” section, which will vary for different Windows Active Directory deployments. Refer to the upstream dex documentation for more details: https://github.com/dexidp/dex/blob/master/Documentation/connectors/ldap.md

Here is an example dex-overrides.yaml file:

config:
  expiry:
    idTokens: "10h"
  connectors:
  - type: ldap
    name: OpenLDAP
    id: ldap
    config:
      host: pv-windows-acti.cumulus.wrs.com:636
      rootCA: /etc/ssl/certs/adcert/AD_CA.cer
      insecureNoSSL: false
      insecureSkipVerify: false
      bindDN: cn=Administrator,cn=Users,dc=cumulus,dc=wrs,dc=com
      bindPW: St8rlingXCloud*
      usernamePrompt: Username
      userSearch:
        baseDN: ou=Users,ou=Titanium,dc=cumulus,dc=wrs,dc=com
        filter: "(objectClass=user)"
        username: sAMAccountName
        idAttr: sAMAccountName
        emailAttr: sAMAccountName
        nameAttr: displayName
      groupSearch:
        baseDN: ou=Users,ou=Titanium,dc=corp,dc=cumulus,dc=wrs,dc=com
        filter: "(objectClass=group)"
        userAttr: DN
        groupAttr: member
        nameAttr: cn
extraVolumes:
- name: certdir
  secret:
    secretName: wadcert
extraVolumeMounts:
- name: certdir
  mountPath: /etc/ssl/certs/adcert

Apply oidc-auth-apps:

system application-apply oidc-auth-apps

Set up users, groups, and authorization ¶

These steps assume there is a user called “testuser” who is a member of both a billingDeptGroup and a managerGroup set up in the Windows Active Directory deployments.

On StarlingX, bind Kubernetes RBAC role(s) to this user and/or group(s). For example, give this user admin privileges by creating the following deployment file and deploy it with the kubectl apply -f filename command.

kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: testuser-rolebinding
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: User
  name: testuser

Alternatively, you can also bind Kubernetes RBAC role(s) for the group(s) of testuser. For example, give all members of the billingDeptGroup admin privileges by creating the following deployment file and deploy it with the kubectl apply -f filename command.

kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
 name: testuser-rolebinding
roleRef:
 apiGroup: rbac.authorization.k8s.io
 kind: ClusterRole
 name: cluster-admin
subjects:
- apiGroup: rbac.authorization.k8s.io
 kind: Group
 name: billingDeptGroup

Set up kubectl with a Kubernetes user to authenticate through dex. This can be done locally on controller-0 or remotely on a workstation.

# setup cluster if you haven’t already
kubectl config set-cluster mystxcluster –server=https://<oam-floating-ip>:6443
kubectl config set-context testuser@mystxcluster --cluster=mystxcluster --user=testuser

Obtain authentication token ¶

You can get the authentication token using the oidc-auth CLI or using a browser.

Use `oidc-auth` CLI¶

The oidc-auth CLI retrieves the ID token from Windows Active Directory using the OIDC client, and dex, and updates the Kubernetes credentials for the user in the kubectl config file.

On controller-0, oidc-auth is installed as part of the base installation, and is ready to use.

On a remote host with kubectl and helm client installed on the host, perform the following required setup:

Install the Python mechanize module:
```
sudo pip2 install mechanize
```
Get the oidc-auth script from the public StarlingX mirror. For example, https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/latest_docker_image_build/outputs/remote-cli/

After setup is complete, run the oidc-auth script to authenticate and update user credentials in the kubectl config file with the retrieved token.

oidc-auth -c <OAM ip address> -u testuser
Password:
Login succeeded.
Updating kubectl config ...
User testuser set.

Switch to the context for this user:

kubectl config use-context testuser@mystxcluster

Run a kubectl command to ensure the token works:

kubectl get pods --all-namespaces

Use browser¶

From a browser, enter the following:
```
https://oam-floating-ip-address:30555
```

In the dialog box, enter your username, password and click Login.

An ID token is displayed as shown below:

ID Token:

eyJhbGciOiJSUzI1NiIsImtpZCI6IjkwYTcyYmIwZTRjNTJhZDhiNGYxMmYxNzc3NTVmNDdmODc5M2ZkYTAifQ.eyJpc3MiOiJodHRwczovLzEwLjEwLjEwLjM6MzA1NTYvZGV4Iiwic3ViIjoiQ2dkbmQyRnBibVZ6RWdSc1pHRnciLCJhdWQiOiJzdHgtb2lkYy1jbGllbnQtYXBwIiwiZXhwIjoxNTgwODQ4NTkzLCJpYXQiOjE1ODA3NjIxOTMsImF0X2hhc2giOiJNU0YtNDBpOWVuM1QyVjdUMWdSZW5RIiwiZW1haWwiOiJnd2FpbmVzIiwiZW1haWxfdmVyaWZpZWQiOnRydWUsIm5hbWUiOiJHcmVnb3J5IEEuIFdhaW5lcyJ9.oNIabUhd5wx3tFCIuewtzsbYfx1OsrGXtEUEPL0l5Y944WE2c1HP6YUHWxvYTMw1_Ldl-jx-koiYbiE8Eztgy9anfJqclUFa6xlxP666Z7AYxndsULylqzfT0dvySaddIEEYDffx7aH6g7q2PKZjMHFierRyqmCu8WTPRSNy3NymLmQaGGjUmFHqbvpEBgg_ytpsDgbRIpk1EbyP63l79hBNlRvcffTRLi3LYYRaJLgSbx2tha43OX5rKxylF_GrzZHaqxxT6MjIHKHagUrcqa054RwPWUHKyV26ErkMg6gN5uyMm462UtnW7jJucYrWBpbaWaj0U0OTWv_1NnKlJw

Access Token:

jwcj46v3vmumpixr54wbyrstf

Claims:

{
  "iss": "https://10.10.10.3:30556/dex",
  "sub": "Cgdnd2FpbmVzEgRsZGFw",
  "aud": "stx-oidc-client-app",
  "exp": 1580848593,
  "iat": 1580762193,
  "at_hash": "MSF-40i9en3T2V7T1gRenQ",
  "email": "testuser",
  "email_verified": true,
  "groups": [
    "billingDeptGroup",
    "managerGroup"
    ],
  "name": "testuser"
}

Set Kubernetes credentials with the above ID token:

~(keystone_admin)]$ TOKEN=<ID token string>
~(keystone_admin)]$ kubectl config setcredentials testuser --token $TOKEN

Switch to the context for this user:

~(keystone_admin)]$ kubectl config use-context testuser@mystxcluster

Run the command kubectl get pods --all-namespaces.

This command should be successful because authentication is complete.