Alarm Messages - 400sΒΆ

The system inventory and maintenance service reports system changes with different degrees of severity. Use the reported alarms to monitor the overall health of the system.

For more information, see Overview.

In the following tables, the severity of the alarms is represented by one or more letters, as follows:

  • C: Critical

  • M: Major

  • m: Minor

  • W: Warning

A slash-separated list of letters is used when the alarm can be triggered with one of several severity levels.

An asterisk (*) indicates the management-affecting severity, if any. A management-affecting alarm is one that cannot be ignored at the indicated severity level or higher by using relaxed alarm rules during an orchestrated patch or upgrade operation.

Differences exist between the terminology emitted by some alarms and that used in the CLI, GUI, and elsewhere in the documentations:

  • References to provider networks in alarms refer to data networks.

  • References to data networks in alarms refer to physical networks.

  • References to tenant networks in alarms refer to project networks.

Alarm ID: 400.001

Service group failure; <list_of_affected_services>.

or

Service group degraded; <list_of_affected_services>

or

Service group Warning; <list_of_affected_services>.

Entity Instance

service_domain=<domain_name>.service_group=<group_name>.host=<hostname>

Severity:

C/M/m*

Proposed Repair Action

Contact next level of support.

Alarm ID: 400.002

Service group loss of redundancy; expected <num> standby member<s> but only <num> standby member<s> available.

or

Service group loss of redundancy; expected <num> standby member<s> but only <num> standby member<s> available.

or

Service group loss of redundancy; expected <num> active member<s> but no active members available.

or

Service group loss of redundancy; expected <num> active member<s> but only <num> active member<s> available.

Entity Instance

service_domain=<domain_name>.service_group=<group_name>

Severity:

M*

Proposed Repair Action

Bring a controller node back in to service, otherwise contact next level of support.